wowbaggerHU |
04-20-2022 08:20 AM |
Code:
root@nanopi-r4s:~# dmesg
Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 5.16.16 (root@pi4-build) (gcc (GCC) 11.2.0, GNU ld version 2.38-slack151) #1 SMP PREEMPT Sat Mar 19 19:30:14 CET 2022
Machine model: FriendlyElec NanoPi R4S
efi: UEFI not found.
NUMA: No NUMA configuration found
NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
NUMA: NODE_DATA [mem 0xf77d1040-0xf77d2fff]
Zone ranges:
DMA [mem 0x0000000000200000-0x00000000f7ffffff]
DMA32 empty
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
On node 0, zone DMA: 512 pages in unavailable ranges
cma: Reserved 128 MiB at 0x00000000e9400000
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 29 pages/cpu s80472 r8192 d30120 u118784
pcpu-alloc: s80472 r8192 d30120 u118784 alloc=29*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: ARM erratum 845719
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 999432
Policy zone: DMA
Kernel command line: root=/dev/mmcblk1p1 ro rootwait rootfstype=ext4 init=/sbin/init console=ttyS2,1500000n8 console=tty1 consoleblank=0 loglevel=4 usb-storage.quirks=
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 3812608K/4061184K available (15552K kernel code, 2666K rwdata, 6084K rodata, 4288K init, 589K bss, 117504K reserved, 131072K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
trace event string verifier disabled
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 256 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
Root IRQ handler: gic_handle_irq
GICv3: 16 PPIs implemented
GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
ITS [mem 0xfee20000-0xfee3ffff]
ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x00000000004d0000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x00000000004e0000
GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
random: get_random_bytes called from start_kernel+0x7dc/0x9c4 with crng_init=0
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
rcu: Hierarchical SRCU implementation.
Platform MSI: interrupt-controller@fee20000 domain created
PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
GICv3: CPU1: using allocated LPI pending table @0x00000000004f0000
CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
GICv3: CPU2: using allocated LPI pending table @0x0000000000580000
CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
GICv3: CPU3: using allocated LPI pending table @0x0000000000590000
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
CPU features: detected: Spectre-v2
CPU features: detected: Spectre-BHB
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
GICv3: CPU4: using allocated LPI pending table @0x00000000005a0000
CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
GICv3: CPU5: using allocated LPI pending table @0x00000000005b0000
CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
smp: Brought up 1 node, 6 CPUs
SMP: Total of 6 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: 32-bit EL1 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
Serial: AMBA PL011 UART driver
platform ff940000.hdmi: Fixing up cyclic dependency with ff8f0000.vop
platform ff940000.hdmi: Fixing up cyclic dependency with ff900000.vop
rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
raid6: neonx8 gen() 1666 MB/s
raid6: neonx8 xor() 1221 MB/s
raid6: neonx4 gen() 1679 MB/s
raid6: neonx4 xor() 1265 MB/s
raid6: neonx2 gen() 1502 MB/s
raid6: neonx2 xor() 1172 MB/s
raid6: neonx1 gen() 1160 MB/s
raid6: neonx1 xor() 955 MB/s
raid6: int64x8 gen() 905 MB/s
raid6: int64x8 xor() 552 MB/s
raid6: int64x4 gen() 1005 MB/s
raid6: int64x4 xor() 579 MB/s
raid6: int64x2 gen() 948 MB/s
raid6: int64x2 xor() 515 MB/s
raid6: int64x1 gen() 724 MB/s
raid6: int64x1 xor() 383 MB/s
raid6: using algorithm neonx4 gen() 1679 MB/s
raid6: .... xor() 1265 MB/s, rmw enabled
raid6: using neon recovery algorithm
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
NET: Registered PF_INET protocol family
IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: vgic-v2@fff20000
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ18
kvm [1]: Hyp mode initialized successfully
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=44 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.35)
integrity: Platform Keyring initialized
xor: measuring software checksum speed
8regs : 2537 MB/sec
32regs : 2918 MB/sec
arm64_neon : 2239 MB/sec
xor: using function: 32regs (2918 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
rockchip-usb2phy ff770000.syscon:usb2phy@e450: failed to create phy
rockchip-usb2phy ff770000.syscon:usb2phy@e460: failed to create phy
dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 41, base_baud = 1500000) is a 16550A
serial serial0: tty port ttyS0 registered
ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 42, base_baud = 1500000) is a 16550A
printk: console [ttyS2] enabled
Serial: AMBA driver
cacheinfo: Unable to detect cache hierarchy for CPU 0
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
thunder_xcv, ver 1.0
thunder_bgx, ver 1.0
nicpf, ver 1.0
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
sky2: driver version 1.30
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c_dev: i2c /dev entries driver
dw_wdt ff848000.watchdog: No valid TOPs array specified
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Freeing initrd memory: 9328K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: fb9fab9e77f4a6090d7619a5336ece780194f545'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010
xhci-hcd xhci-hcd.0.auto: irq 73, io mem 0xfe900000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.16.16 xhci-hcd
usb usb1: SerialNumber: xhci-hcd.0.auto
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.16.16 xhci-hcd
usb usb2: SerialNumber: xhci-hcd.0.auto
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-platform fe380000.usb: EHCI Host Controller
ehci-platform fe380000.usb: new USB bus registered, assigned bus number 3
ehci-platform fe380000.usb: irq 33, io mem 0xfe380000
ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 5.16.16 ehci_hcd
usb usb3: SerialNumber: fe380000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-platform fe3c0000.usb: EHCI Host Controller
ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 4
ehci-platform fe3c0000.usb: irq 35, io mem 0xfe3c0000
ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 5.16.16 ehci_hcd
usb usb4: SerialNumber: fe3c0000.usb
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci-platform fe3a0000.usb: Generic Platform OHCI controller
ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 5
ohci-platform fe3a0000.usb: irq 34, io mem 0xfe3a0000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: Generic Platform OHCI controller
usb usb5: Manufacturer: Linux 5.16.16 ohci_hcd
usb usb5: SerialNumber: fe3a0000.usb
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-platform fe3e0000.usb: Generic Platform OHCI controller
ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 6
ohci-platform fe3e0000.usb: irq 36, io mem 0xfe3e0000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: Generic Platform OHCI controller
usb usb6: Manufacturer: Linux 5.16.16 ohci_hcd
usb usb6: SerialNumber: fe3e0000.usb
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
rk808 0-001b: chip id: 0x0
rk808-regulator rk808-regulator: there is no dvs0 gpio
rk808-regulator rk808-regulator: there is no dvs1 gpio
rk808-regulator rk808-regulator: max buck steps per change: 8
random: fast init done
rk808-rtc rk808-rtc: registered as rtc0
rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:17 UTC (1358499017)
dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
dwmmc_rockchip fe320000.mmc: Version ID is 270a
dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
dwmmc_rockchip fe320000.mmc: Got CD GPIO
rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
rockchip-pcie f8000000.pcie: no bus scan delay, default to 0 ms
rockchip-pcie f8000000.pcie: no vpcie12v regulator found
mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
rockchip-pcie f8000000.pcie: wait 0 ms (from device tree) before bus scan
rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-1f]
pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
pci 0000:00:00.0: supports D1
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
pci 0000:01:00.0: reg 0x10: [io size 0x0100]
pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64bit]
pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64bit]
pci 0000:01:00.0: BAR 0: no space for [io size 0x0100]
pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
pcieport 0000:00:00.0: enabling device (0000 -> 0002)
pcieport 0000:00:00.0: PME: Signaling with IRQ 89
pcieport 0000:00:00.0: AER: enabled with IRQ 89
input: gpio-keys as /devices/platform/gpio-keys/input/input0
Freeing unused kernel memory: 4288K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[251]: starting eudev-3.2.11
dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 173
mmc1: new ultra high speed SDR104 SDHC card at address 0007
mmcblk1: mmc1:0007 SL32G 29.0 GiB
mmcblk1: p1
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
urandom_read: 3 callbacks suppressed
random: vgchange: uninitialized urandom read (4 bytes read)
EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null). Quota mode: none.
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[533]: starting eudev-3.2.11
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
rk_gmac-dwmac fe300000.ethernet: clock input from PHY
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
rk_gmac-dwmac fe300000.ethernet: init for RGMII
rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
rk_gmac-dwmac fe300000.ethernet: DWMAC1000
rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
rk_gmac-dwmac fe300000.ethernet: COE Type 2
rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
rk_gmac-dwmac fe300000.ethernet: Normal descriptors
rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
rockchip-rga ff680000.rga: HW Version: 0x03.02
rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
rockchip-iep ff670000.iep: Device rockchip-iep registered as /dev/video1
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Driver 'hci_uart_qca' needs updating - please use bus_type methods
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
rkvdec ff660000.video-codec: Adding to iommu group 1
dw-apb-uart ff180000.serial: failed to request DMA
Bluetooth: hci0: command 0xfc45 tx timeout
EXT4-fs (mmcblk1p1): Remounting file system with no journal so ignoring journalled data option
EXT4-fs (mmcblk1p1): re-mounted. Opts: data=writeback,errors=remount-ro. Quota mode: none.
Bluetooth: hci0: BCM: failed to write clock (-110)
Bluetooth: hci0: Failed to set baudrate
Bluetooth: hci0: command 0x0c03 tx timeout
Adding 131068k swap on /swap. Priority:5 extents:2 across:139260k SSFS
Bluetooth: hci0: BCM: Reset failed (-110)
random: crng init done
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=91)
rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: hci0: command 0xfc45 tx timeout
Bluetooth: hci0: BCM: failed to write clock (-110)
Bluetooth: hci0: Failed to set baudrate
Bluetooth: hci0: command 0x0c03 tx timeout
Bluetooth: hci0: BCM: Reset failed (-110)
dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=91)
rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
|